標題:鑄造作業生產過程中有害因素及其特點分析

  [摘要]: 通過定期監測鑄造生產環境中的粉塵、毒物濃度及噪聲強度, 并進行17 年動態觀察, 總結了綜合性治理措施。用電子掃描顯微鏡能散x 線分析(sem - eds) 方法對鑄造粉塵表面成分進行了分析。結果表明, 清理、造型、配砂、制芯、熔化和落砂等工序游離sio2 含量均超過10 % , 分散度小于5μm的可吸入性粉塵偏高(6915 %~78 %) , 空氣中矽塵沒有al 的包裹, 是新鮮的粉塵, 致病性強。采取綜合 ……(快文網http://m.hoachina.com省略363字,正式會員可完整閱讀)…… 
  更多相關文章:鑄造作業生產過程中有害因素及
l measures are summarized. the contaminants on particulate surface are analyzed by scanningelectron microscopy2energy dispersive x2ray analysis (sem - eds) . the results show that in the processes of shake2out and finishing , molding , sand preparation , pouring , melting and coremaking , all the dusts are silica2containing dust . the respirable dust ( < 5 μm) occupies as high as 6915 %~ 78 %. silica2containing dust infoundry air is not packed by al. it indicates that silica dust in foundry air is fresh and highly pathogenic. withcomprehensive control measures , development of technological innovation and using new chemical materials ,concentrations of dust and toxicants have significantly lowered except the nois ……(未完,全文共7830字,當前只顯示942字,請閱讀下面提示信息。收藏鑄造作業生產過程中有害因素及其特點分析

上一篇:消防信息化建設中的網絡a全分析
下一篇:從美國9.11事件談北京cbd超高層建筑群等防災安全問題